Fire Safety at Fire Zone



A hazardous area can be defined as any location where there is risk of an explosion. But every hazardous area is different and each has specific requirements depending on the nature of the atmosphere and the elements that are present. Where there is potential for an explosive atmosphere, special precautions are needed to prevent fires and explosions. Electronic equipment, including lighting, needs to be purpose designed for use in hazardous areas to prevent a spark occurring and igniting any flammable substances.

Benefits of HAC:

  • Identification of Zones (0,1,2)
  • Identification of Potential Ignition Sources in the Facility.
  • Determination of ATEX rating for the Instrumentations at the facility.
components of a hazardous area


Dust Explosion risk assessment (DERA)

The majority of powders that are used in the processing industries are combustible (also referred to as flammable, explosible). An explosion will occur if the concentration of the combustible dust that is suspended in air is sufficient to propagate flame when ignited by a sufficiently energetic ignition source. A systematic approach to identifying dust cloud explosion safety against their consequences generally involves:

  1. Identification of locations where combustible dust cloud atmospheres could be present
  2. Understanding of the explosion characteristics of the dust(s)
  3. Identification of potential ignition sources that could be present under normal and abnormal conditions
  4. Proper process and facility design to eliminate and/or minimize the occurrence of dust explosions and protect people and facilities against their consequences
  5. Adequate maintenance of facilities to prevent ignition sources and minimize dust release

ELECTROSTATICS Hazard Assessment

Electrostatic charging can occur when solids or liquids move relative to the plant they are contained in or charged by induction. Electrostatic charging therefore occurs frequently in industrial process plant.

If charge is allowed to accumulate and discharge, an electrostatic hazard may arise. A static related incident can cause a serious fire or explosion. These incidents can cause significant loss of life and plant followed by legal action and associated bad publicity.

Any process plant that handles or processes flammable liquids, dusts, gases or vapours is at risk from electrostatic induced ignition.

Benefits of Electrostatic Hazard Assessment:

  • Improved safety, health and environmental compliance
  • Lower safety risks through improved control of a very common ignition source
  • Compliance with ATEX/DSEAR risk assessment requirements

What we offer:

  • Determination of flammable atmosphere potential
  • Evaluation of electrostatic charge generation
  • Determination of potential for charge accumulation and discharge
  • Determination of all possible discharge scenarios and their igniting power
  • Evaluation of ignition risk – Implementation of a total solution