NDT and PDT Testing
Experience the power of advanced NDT & PDT Testing with Wire Consultancy. Our non-destructive testing and positive material identification techniques offer businesses a comprehensive assessment of asset integrity, reliability, and quality. With a focus on precision and efficiency, we provide accurate results and valuable insights to optimize maintenance strategies and ensure compliance with regulations.
We Strive to Drive
Safety Culture
Certified Consultants
NDT & PDT Testing
Non-destructive and partially-destructive tests (NDT & PDT) is a wide group of analysis techniques used in industry that provide a comprehensive site investigation service to test steel & concrete structures. It determines & evaluates the suitability of structural material without causing damage to the structural integrity of a material. Some of the common NDT testing services offered by us are
Rebound Hammer
A rebound hammer consists of a spring-controlled mass that slides on a plunger within a tubular housing. The extent of rebound is a measure of surface hardness this value is designated as Rebound Number. Surface hardness is correlated with compressive and rebound numbers indicate compressive strength of concrete.
Ultrasonic Pulse Velocity Tester
It is used for nondestructive testing and checking the quality of concrete. In this test, the strength and quality of concrete are assessed by measuring the velocity of an ultrasonic pulse passing through a concrete structure. Quality of concrete is classified based on ultrasonic wave speed where samples with the slowest speed are considered made of porous & poor quality concrete while samples with more than 4Km/s speed are considered excellent quality.
Ultrasonic Thickness Gauge
It is used for non-destructive measurement of the local thickness of a solid element like MS sections – Angle, Channel, I section, etc. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications, especially in pipes & flats.
Laser Distance Meter
It measures long distances by sending a pulse of laser light to the target and measures the time it takes for the reflection to return. Distance meters have some advantages over tape like no bending, no sagging, and the choice of measuring unit and quick to use.
Dye Penetration Kit
It is used to detect flaws that are open to the surface in materials such as metals, glass, and other non-porous materials. The process works by capillary action which pulls the penetrant into the open flaw and then indicates the flaw areas after the application of the developer.
Thermography Camera
It is used for the detection of moisture behind walls, over ceilings, and under floors which is invisible to the human eye. An infrared camera detects infrared energy (heat) and converts it into an electronic signal, which is then processed to produce a thermal image. These detected areas are further investigated to find the source of water leakage & repair work is initiated.
Carbonation Kit
This kit contains an indicator that is sprayed on exposed concrete surfaces to measure the extent of carbonation in concrete. Carbonation of concrete is one of the main reasons for corrosion of reinforcement and hence it is detected to estimate the probability of corrosion in reinforcement.
Rebar Locator
This device is used to locate the embedded reinforcement bars inside the masonry and concrete with the use of an electromagnetic pulse. The scanner machine is also helpful in detecting embedded power lines, non-ferrous metals, and wood.
Half Cell Potential Meter
It is used to monitor the probability of corrosion in reinforcement. Corrosion is an electrochemical reaction that creates a potential difference, and consequently a corrosion current, between the anodic and cathode areas at the surface of the steel reinforcement. This current, or the potential distribution on the reinforcement surface, is what is of interest when measuring half-cell potential. The measured potential is used to classify the probability of corrosion with 3 different criticality levels.
Wire Consultancy offers comprehensive NDT & PDT Testing
Wire consultancy is a highly rated Engineering, Risk management, EHS, and sustainability Solutions Consultancy that offers NDT and PDT Testing services. Wire consultancy consists of a diverse team of experienced auditors and professionals who have been working in the NDT and PDT Testing field for over 20 years and have a deep understanding of NDT and PDT Testing.
At Wire Consultancy, we provide NDT and PDT Testing services that are customized to your company’s needs. We understand that each project has unique requirements and we are here to help you get the results you need.
We offer a wide range of testing services from initial project planning through post-project follow-up, including:
- Nondestructive testing (NDT) and destructive testing (PDT) inspection services
- Nondestructive testing (NDT) and destructive testing (PDT) testing services
- Nondestructive testing (NDT) and destructive testing (PDT) analysis services
Similar Services
Contact
Feel free to contact us for any questions and query
Connecting with Us is Just a Click Away – Let’s Begin Your Project Hassle Free.
Our team of experienced consultants is ready to collaborate with you to achieve your engineering, safety and sustainability goals. Get in touch with us to learn more.
Our Offices
Noida Office
Office-03, First Floor, D-53, Sector-2,
Noida, Uttar Pradesh-201301, India
For Business Enquiry
Info@wireconsultants.com
+91-9810827158
For HR Enquiry
hr@wireconsultants.com
+91-7827931701